FAQ - Rail Systems

Can the URail rails be shortened?

Can the URail rails be shortened?

No. The URail rails may not be shortened, as the rails would no longer be shock proof and there would be danger of electrocution. But there are alternatives!

Can the URail rails be mounted on slanted walls?

Can the URail rails be mounted on slanted walls?

The URail rails are designed to be installed on the ceiling. However, installation at a slant of up to 45° is also possible.

Can the URail L-connector be used in both directions?

Can the URail L-connector be used in both directions?

Yes, the L-connector can be installed on a right curve or left curve.

Can the URail T-connector be used in both directions?

Can the URail T-connector be used in both directions?

Yes, the T-connector can be used to branch off to the right or to the left.

What are the maximum height differences that can be bridged using the URail MAX-connectors?

What are the maximum height differences that can be bridged using the URail MAX-connectors?

The MAX connector can be used to bridge a height difference of approx. 30 cm.

How does the URail PIR Rail Switch with remote control work?

How does the URail PIR Rail Switch with remote control work?

The URail PIR rail switch is a connector that makes it possible to use a remote control to switch/dim all of the rails downstream from the power supply. If several of these connectors are connected in a row, it is not possible for a front rail to be switched off while at the same time, a rail farther down the line is switched on. It is only possible to sequentially, in the direction of the power supply, switch the rails on or off or dim the rails.

How many suspending brackets should be attached to which URail rails?

How many suspending brackets should be attached to which URail rails?

The 0.5 m rail has 2 points for attaching suspending brackets. The 1.0 m rail has 2 points for attaching suspending brackets. The 2.0 m rail has 3 points for attaching suspending brackets.

Basic sets and expansion sets: Why do the suspending brackets have different heights?

Basic sets and expansion sets: Why do the suspending brackets have different heights?

With the supplied cross connectors for the rods, there are 2 different levels of rod heights. For this reason, connectors of different heights have been supplied.